
- Collections
Edwards RV3 rotary pump, 240V (EMS)
The RV series of small oil sealed rotary vane pumps deliver ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. They are significantly quieter – noise levels of 48 dBA 50Hz are typically half the noise of a conventional pump and have been achieved by extensive work on the drive train and motor. The RV pump is ideal for analytical instruments, electron microscopes, physics research, backing turbo pumps, TV tube pumping and leak detection applications. Configure the same pump in the high throughput mode, and it becomes suitable for mass spectrometer inlet systems, distillation, laboratory furnaces, backing vapour pumps, solvent concentration, freeze drying and other drying applications.
These pumps have the unique ability to deliver ultimate vacuum in both high vacuum and high throughput modes, with or without gas ballast. This gives the user an unrivalled opportunity to select the optimum pumping performance without compromising the application.
The simple to use mode selector and accessible, three-position gas ballast control, allow the pump to be reconfigured at any time, even when the pump is running.
Applications:
- Analytical Instruments
- Laboratory Bench Top Vacuum
- Turbomolecuar Backing Pumps
- Freeze Drying
- Research and Development
- Centrifuges, Ultra-High Speed
- Coating
- Degassing/Curing – Oil, Epoxy Resin
- Distillation/Extraction/Filtration
- Furnaces
- Gas Bottle Filling/Emptying
- Gel Drying
- Glove Boxes, Ovens
- Leak Detectors, Helium
- Load Locks and Transfer Chambers
- Refrigeration Manufacture
- Rotary, Centirfugal Evaporators
- Scanning Electron Microscopes (SEM)
- SEM/FIB (Ion Beam Repair)
- Solvent Recovery
- Surface Science Instruments
Specifications:
Displacement | @ 50Hz - 3.7 m3h-1 / 2.2 ft3min-1 @ 60Hz - 4.5 m3h-1 / 2.6 ft3min-1 |
Speed (Pneurop 6602) |
@ 50Hz - 3.3 m3h-1 / 2 ft3min-1 @ 60Hz - 3.9 m3h-1 / 2.3 ft3min-1 |
Ultimate Pressure | 2.0 x 10-3 mbar / 1.5 x 10-3 Torr |
Ultimate Pressure GB I | 3.0 x 10-2 mbar / 2.3 x 10-2 Torr |
Ultimate Pressure GB II | 1.2 x 10-1 mbar / 9.1 x 10-2 Torr |
Ultimate Pressure with Fomblin | 2 x 10-2 mbar / 1.5 x 10-2 Torr |
Max Inlet Pressure for Water Vapour | 80 mbar / 60 Torr |
Max Water Vapour Pumping Rate – GB I | 60 gh-1 |
Max Water Vapour Pumping Rate – GB II | 220 gh-1 |
Max Allowed Outlet Pressure | 0.2 bar gauge |
Max Allowed Inlet and Gas Ballast Pressure | 0.5 bar gauge |
Motor Power 50/60Hz | 450 / 550W |
Power Connector 1-ph | IEC EN60320 C13 |
Nominal Rotation Speed 50/60Hz | 1500 / 1800rpm |
Weight (without oil) | 25kg |
Oil Capacity min/max | 0.7L |
Recommended Oil | Ultragrade 19 |
Inlet Flange | NW25 |
Exhaust Flange | NW25 |
Noise Level | 48dB(A) @ 50Hz |
Operating Temperature Range | 12-40°C |
* Ordering Schedule
This item is available for back-order where 0 stock is listed.
We order from this manufacturer weekly, with an estimated lead time of 4 weeks.
This is the estimated lead time, based on the average time taken previously to fill orders from this particular supplier.
Lead times are from when we receive your order until when we fill your order. For delivery times, please see shipping information below.