- Collections
Electrically and thermally conductive adhesives
Electrally/Thermally Conductive (ETC) epoxy adhesives provide solutions to a variety of electrical, electronic, and thermal design problems throughout the laboratories and industries.
Properties Electrically/Thermally Conductive
Product Number | 525 | 556 | 597A | 598FS | 568 | 805 | 860 |
Filler | Silver | Silver | Silver | Nickel | Aluminium |
Aluminium | Aluminium Nitride |
Mix Ratio by Weight: Resin : Hardener | NA | 1:1 | NA | NA | 1:1 | 100:12 | 1:1 |
Mixes Specific Gravity, g/cc @ 25?C | 1.85 | 2.8 | 2.3/2.1 | 2.87/1.5 | 0.85 | 1.66 | 1.9 |
Mixes Viscosity, @ 25?C, cps | Paste | Paste | Paste/Paste | Paste/480 | Paste | 85,000 | Paste |
Pot Life, 100g mass @ 25?C, hrs. | N/A | 1 | N/A | N/A | 4.0 | ?1.0 |
4.0 |
Recommended Cure, hr/?F | 2/300 | 24/RT | 2/RT+2/200 | 2RT+2/200 | 2/200 | 2/100+2/200 |
2/200 |
Alternative Cure, hr/?F | 6/250 | 4/170 or 2/210 | -- | -- | 24-48/RT | 24-48/RT |
24-48/RT |
Temperature Resistance | 171?C | 171?C | 649?C | 538?C | 204?C | 300?C | 400 (204) |
CTE, in/in/?F x 106 (?C) | 52.2?C | 25.0?C | 17.3?C | 11.7?C | 60.0?C | 45.0?C | 18.7 (33.3) |
Thermal Conductivity, Btu-in/hr-ft2-?F | 62.2 | 65.0 | 63.1 | 17.9 | 9.0 | 12.5 | 8.5 |
Tensile Shear Strength, psi * | 2,500 | 1,500 | -- | -- | 1,400 | 1,200 | 1,375 |
Volume Resistivity, ohm-cm | 0.01 | 0.0052 | 0.0002 | 0.005 | 1.0 x 105 | 1.0 x 1014 | 1.0 x 1014 |
Dielectric Strength, volts/mil | - | - | - | - | 80 | 50 | 250 |
Chemical Resistance | Excellent | Excellent | Excellent | Excellent | Excellent |
Good | Excellent |
Colour | Silver | Silver | Silver | Dark Gray | Grey | Grey | Grey |
Store at room temperature
Application Notes:
Surface Preparation: All surfaces must be free of oil, dirt, corrosives, oxides, paint or other foreign matter.
Mixing: Two-component products should be mixed thoroughly to a uniform consistency. Preheat high viscosity epoxies to approximately 125?F to facilitate pouring and mixing.
Application: In most cases, the adhesive should be applied to both surfaces maintaining a glue line of less than 10 mils (25.4 ?m). After assembling the parts, pressure should be applied to the assembly to prevent warpage and reduce air entrapment. Refer to curing guidelines in above property chart.
ETC Bond 525 - Electrically conductive, silver filled, one-part epoxy paste. Good chemical resistance and mechanical strength to 340?F. SDS
ETC Bond 556 - Electrically conductive. Silver filled, 1:1 Epoxy paste. Good corrosion resistance and mechanical strength to 340?F. SDS Part A - Activator SDS Part B - base Resin
ETC Bond 597A - Electrically and thermally conductive. Silver filled. One part system. Inorganic system for bonding applications up to 1200?F.
ETC Bond 598FS - Electrically and thermally conductive. Nickel filled. One part system. Low viscosity. For applications up to 1000?F. SDS
ETC Bond 568 - Thermally conductive. Aluminum filled, 1:1 epoxy paste. Excellent mechanical strength to 400?F. SDS Part A - Activator SDS Part B - Base Resin
ETC Bond 805 - Thermally conductive. Aluminum filled. Two part epoxy paste. Low shrink rate. Excellent mechanical strength to 570?F. SDS Part A - Activator SDS Part B - Base Resin
ETC Bond 860 - Thermally conductive. Aluminum nitride filled. 1:1 epoxy paste. Excellent mechanical & thermal properties to 400?F. SDS Part A - Activator SDS Part B - Base Resin
Code | Title | Style | Pack Size | Availability | Price | Updated: 03-11-2024 |
---|---|---|---|---|---|---|
EMS50380-525 | Electrically and thermally conductive adhesives | Bond 525 | 5g | 0 in stock (?) | $84.00 AUD | |
EMS50380-556 | Electrically and thermally conductive adhesives | Bond 556 | 5g | 0 in stock (?) | $84.00 AUD | |
EMS50380-568 | Electrically and thermally conductive adhesives | Bond 568 | 2 x 25g | 0 in stock (?) | $86.00 AUD | |
EMS50380-597 | Electrically and thermally conductive adhesives | Bond 597A | 5g | 0 in stock (?) | $80.00 AUD | |
EMS50380-598 | Electrically and thermally conductive adhesives | Bond 598FS | 50g | 0 in stock (?) | $87.00 AUD | |
EMS50380-805 | Electrically and thermally conductive adhesives | Bond 805 | 2 x 25g | 0 in stock (?) | $84.00 AUD | |
EMS50380-860 | Electrically and thermally conductive adhesives | Bond 860 | 2 x 25g | 0 in stock (?) | $84.00 AUD |
* Ordering Schedule
This item is available for back-order where 0 stock is listed.
We order from this manufacturer weekly, with an estimated lead time of 4 weeks.
This is the estimated lead time, based on the average time taken previously to fill orders from this particular supplier.
Lead times are from when we receive your order until when we fill your order. For delivery times, please see shipping information below.