MicroMesh mounts assortment box

MicroMesh Mounts are the tool of choice for microcrystal crystallography and diffraction experiments, especially at micro-focus beam-lines. They have been use in de novo protein structure determination from crystals as small as 5um.

They are excellent for rods shaped crystals, and are superior to mount with elliptical apertures, because the mesh provides continuous, gentle support for rods of all sizes.

MicroMesh produce the smallest background scatter of any commercial mount. Their sieve-like action allows easy retrieval of sub 30um crystals.

We offer five different sizes MicroMesh. All are 10um thick, with curved around tip, mounted on non-magnetic stainless steel pin as the same way as MicroMount, producing scoop like action.

• Three of 400um diameter mesh area with 10, 25, and 50um openings
• One of 700um diameter with mesh area with 25um openings.

These four are available as single-size boxes, or in an assortment. Multiple small crystals can be retrieved and mounted together, spread out over the mesh. The diffraction properties of each crystals can be separately interrogated using a small (<100um) X-ray beam, so crystal heterogeneity and maximum diffraction quality yielded by a given drop's conditions can be quickly determined. This is useful in early crystallization trials when showers of crystals and precipitate are obtained.

When a drop contains many crystals, two or more crystallographic forms may be present which can differ dramatically in the quality of their diffraction. The regular grid of each MicroMesh makes it easy to match a diffraction pattern with a crystal and habit. Minimal crystals can be used.

Excess liquid can be removed using size #15 liquid wicks. Mounts can be cleaned using Medium or Fine liquid wicks.

• The fifth MicroMesh Mount has an 80um diameter mesh area with 15um openings.

This small head is designed to fit entirely within the 80µm and larger X-ray beams typical of standard synchrotron beam-lines and of focused laboratory sources. Consequently, you do not have to see your tiny crystal to align it, just centre the 80um head in the beam, and your crystal will be within it.

The smaller head also makes it easier to mount a single crystal, and produces less background scatter when the beam is aligned along the plane of the film.

Assortment box contain 5 each of 400/10, 400/25, 400/50, 700/25, and 800/15 MicroMesh mounts, each attached to nonmagnetic stainless steel pin. Pins are marked in 2mm intervals, and can be cut or to your desired length.