• Collections

Workholders for ULTRAPOL end and edge polisher

The ULTRAPOL end and edge polisher (EMS6390.1) is ideal for flat and angled preparation of optical and electronic components.The specific workholder for an application is held firmly and repeatably with the system's quick release interface. Standard holders are available for most applications, including:Capillary/glass ferrule polishingPlanar Waveguide polishingBare fibre polishing - flat and angle polishing Integrated opticsDie Cross-sectioningSEM and TEM sample preparationIC Wafer and package-level backside preparationEncapsulated mount polishingCustom workholders can also be designed to your specific needs.EMS4079.1Thin plate edge polishing holder - holds plates up to 2.5cm longEMS4079.2Thin plate edge polishing holder -...

The ULTRAPOL end and edge polisher (EMS6390.1) is ideal for flat and angled preparation of optical and electronic components.

The specific workholder for an application is held firmly and repeatably with the system's quick release interface. Standard holders are available for most applications, including:

  • Capillary/glass ferrule polishing
  • Planar Waveguide polishing
  • Bare fibre polishing - flat and angle polishing Integrated optics
  • Die Cross-sectioning
  • SEM and TEM sample preparation
  • IC Wafer and package-level backside preparation
  • Encapsulated mount polishing

Custom workholders can also be designed to your specific needs.

EMS4079.1 Thin plate edge polishing holder - holds plates up to 2.5cm long
EMS4079.2 Thin plate edge polishing holder - holds plates up to 5cm long
EMS2707.1 Bare fibre holder (with 125 micron replaceable ferrule) - 1 position
EMS2707.4 Bare fibre holder (with 125 micron replaceable ferrule) - 4 positions
EMS2745.1 Bare fibre holder - holds 5-8 fibres - each for fibres > 400 micron (specify fibre size when ordering)
EMS3552.1 Saddle Clamp - holds endoscopes, glass rods, etc.
EMS3547.1 V-clamp - holds large fibre bundles and rods (16mm to 34mm diameter)
EMS2727.1 Capillary/glass ferrule workholder (1.25 to 2.5mm diameter) - 12 positions
EMS2726.1 Capillary setting stand - works with 2727.1
EMS2024.1 Encapsulated mount workholder - (holds mounts 0.5 to 1.5 inch diameter)
EMS4065.1 Single die edge x-section/SEM Stub holder
EMS2707.XXX
Bare fibre holder, custom
Code Title Type Pack Size Availability Price Updated: 05-03-2024
EMS2024.1 Workholders for ULTRAPOL end and edge polisher Encapsulated mount Each No ETA Quote only Quote
Quote
EMS2707.1 Workholders for ULTRAPOL end and edge polisher Bare fibre holder, 1 position Each No ETA Quote only Quote
Quote
EMS2707.4 Workholders for ULTRAPOL end and edge polisher Bare fibre holder, 4 positions Each No ETA Quote only Quote
Quote
EMS2707.XXX Workholders for ULTRAPOL end and edge polisher Bare fibre holder, custom Each No ETA Quote only Quote
Quote
EMS2726.1 Workholders for ULTRAPOL end and edge polisher Capillary setting stand Each No ETA Quote only Quote
Quote
EMS2727.1 Workholders for ULTRAPOL end and edge polisher Capillary/glass ferrule workholder Each No ETA Quote only Quote
Quote
EMS2745.1 Workholders for ULTRAPOL end and edge polisher Bare fibre holder, 5-8 fibre Each No ETA Quote only Quote
Quote
EMS3547.1 Workholders for ULTRAPOL end and edge polisher V-clamp Each No ETA Quote only Quote
Quote
EMS3552.1 Workholders for ULTRAPOL end and edge polisher Saddle clamp Each No ETA Quote only Quote
Quote
EMS4065.1 Workholders for ULTRAPOL end and edge polisher SEM pin stub holder Each No ETA Quote only Quote
Quote
EMS4079.1 Workholders for ULTRAPOL end and edge polisher Thin plate edge polishing holder, 2.5cm Each No ETA Quote only Quote
Quote
EMS4079.2 Workholders for ULTRAPOL end and edge polisher Thin plate edge polishing holder, 5cm Each No ETA Quote only Quote
Quote