0item(s)

You have no items in your shopping cart.

Prices are current as of Thursday, 22/10/2020.
Prices are GST exclusive. Tax is added at checkout.

$96.00
Availability:
Product Code: EMS50380-525

Please ensure the dropdown options are correct

We offer a broad line of electrically and thermally conductive materials, which provide solutions to a variety of electrical, electronic, and thermal design problems throughout the laboratories and industries.

Properties Electrically/Thermally Conductive

Product Number 525 556 597A 598FS 568 805 860
Filler Silver Silver Silver Nickel Aluminum
Aluminium Aluminium Nitride
Mix Ratio by Weight: Resin : Hardener NA 1:1 NA NA 1:1 100:12 1:1
Mixes Specific Gravity, g/cc @ 25°C 1.85 2.8 2.3/2.1 2.87/1.5 0.85 1.66 1.9
Mixes Viscosity, @ 25°C, cps Paste Paste Paste/Paste Paste/480 Paste 85,000 Paste
Pot Life, 100g mass @ 25°C, hrs. N/A 1 N/A N/A 4.0 ≤1.0
4.0
Recommended Cure, hr/°F 2/300 24/RT 2/RT+2/200 2RT+2/200 2/200 2/100+2/200
2/200
Alternative Cure, hr/°F 6/250 4/170 or 2/210 -- -- 24-48/RT 24-48/RT
24-48/RT
Temperature Resistance, °F (°C) 340 (171) 340 (171) 1200 (649) 1000 (538) 400 (204 572 (300) 400 (204)
CTE, in/in/°F x 106 (°C) 29.0 (52.2) 13.9 (25.0) 9.6 (17.3) 6.5 (11.7) 33.0 (60.0) 25.0 (45.0) 18.7 (33.3)
Thermal Conductivity, Btu-in/hr-ft2-°F 62.2 65.0 63.1 17.9 9.0 12.5 8.5
Tensile Shear Strength, psi * 2,500 1,500 -- -- 1,400 1,200 1,375
Volume Resistivity, ohm-cm 0.01 0.0052 0.0002 0.005 1.0 x 105 1.0 x 1014 1.0 x 1014
Dielectric Strength, volts/mil 80 50 250
Chemical Resistance Excellent Excellent Excellent Excellent Excellent
Good Excellent
Colour Silver Silver Silver Dark Gray Grey Grey Grey

Store at room temperature 

Application Notes:

Surface Preparation: All surfaces must be free of oil, dirt, corrosives, oxides, paint or other foreign matter.

Mixing: Two-component products should be mixed thoroughly to a uniform consistency. Preheat high viscosity epoxies to approximately 125°F to facilitate pouring and mixing.

Application: In most cases, the adhesive should be applied to both surfaces maintaining a glue line of less than 10 mils (25.4 µm). After assembling the parts, pressure should be applied to the assembly to prevent warpage and reduce air entrapment. Refer to curing guidelines in above property chart.

Technical Data Sheet

Technical Data Sheet 598

Technical Data Sheet 860

ETC Bond 525 – Electrically conductive, silver filled, one-part epoxy paste. Good chemical resistance and mechanical strength to 340°F.   SDS

ETC Bond 556 – Electrically conductive. Silver filled, 1:1 Epoxy paste. Good corrosion resistance and mechanical strength to 340°F.   SDS Part A - Activator SDS Part B - base Resin

ETC Bond 597A – Electrically and thermally conductive. Silver filled. One part system. Inorganic system for bonding applications up to 1200°F.

ETC Bond 598FS – Electrically and thermally conductive. Nickel filled. One part system. Low viscosity. For applications up to 1000°F.   SDS

ETC Bond 568 – Thermally conductive. Aluminum filled, 1:1 epoxy paste. Excellent mechanical strength to 400°F.   SDS Part A - Activator   SDS Part B - Base Resin

ETC Bond 805 – Thermally conductive. Aluminum filled. Two part epoxy paste. Low shrink rate. Excellent mechanical strength to 570°F.   SDS Part A - Activator  SDS Part B - Base Resin

ETC Bond 860 – Thermally conductive. Aluminum nitride filled. 1:1 epoxy paste. Excellent mechanical & thermal properties to 400°F.   SDS Part A - Activator   SDS Part B - Base Resin



We offer a broad line of electrically and thermally conductive materials, which provide solutions to a variety of electrical, electronic, and thermal design problems throughout the laboratories and industries.

Properties Electrically/Thermally Conductive

Product Number 525 556 597A 598FS 568 805 860
Filler Silver Silver Silver Nickel Aluminum
Aluminium Aluminium Nitride
Mix Ratio by Weight: Resin : Hardener NA 1:1 NA NA 1:1 100:12 1:1
Mixes Specific Gravity, g/cc @ 25°C 1.85 2.8 2.3/2.1 2.87/1.5 0.85 1.66 1.9
Mixes Viscosity, @ 25°C, cps Paste Paste Paste/Paste Paste/480 Paste 85,000 Paste
Pot Life, 100g mass @ 25°C, hrs. N/A 1 N/A N/A 4.0 ≤1.0
4.0
Recommended Cure, hr/°F 2/300 24/RT 2/RT+2/200 2RT+2/200 2/200 2/100+2/200
2/200
Alternative Cure, hr/°F 6/250 4/170 or 2/210 -- -- 24-48/RT 24-48/RT
24-48/RT
Temperature Resistance, °F (°C) 340 (171) 340 (171) 1200 (649) 1000 (538) 400 (204 572 (300) 400 (204)
CTE, in/in/°F x 106 (°C) 29.0 (52.2) 13.9 (25.0) 9.6 (17.3) 6.5 (11.7) 33.0 (60.0) 25.0 (45.0) 18.7 (33.3)
Thermal Conductivity, Btu-in/hr-ft2-°F 62.2 65.0 63.1 17.9 9.0 12.5 8.5
Tensile Shear Strength, psi * 2,500 1,500 -- -- 1,400 1,200 1,375
Volume Resistivity, ohm-cm 0.01 0.0052 0.0002 0.005 1.0 x 105 1.0 x 1014 1.0 x 1014
Dielectric Strength, volts/mil 80 50 250
Chemical Resistance Excellent Excellent Excellent Excellent Excellent
Good Excellent
Colour Silver Silver Silver Dark Gray Grey Grey Grey

Store at room temperature 

Application Notes:

Surface Preparation: All surfaces must be free of oil, dirt, corrosives, oxides, paint or other foreign matter.

Mixing: Two-component products should be mixed thoroughly to a uniform consistency. Preheat high viscosity epoxies to approximately 125°F to facilitate pouring and mixing.

Application: In most cases, the adhesive should be applied to both surfaces maintaining a glue line of less than 10 mils (25.4 µm). After assembling the parts, pressure should be applied to the assembly to prevent warpage and reduce air entrapment. Refer to curing guidelines in above property chart.

Technical Data Sheet

Technical Data Sheet 598

Technical Data Sheet 860

ETC Bond 525 – Electrically conductive, silver filled, one-part epoxy paste. Good chemical resistance and mechanical strength to 340°F.   SDS

ETC Bond 556 – Electrically conductive. Silver filled, 1:1 Epoxy paste. Good corrosion resistance and mechanical strength to 340°F.   SDS Part A - Activator SDS Part B - base Resin

ETC Bond 597A – Electrically and thermally conductive. Silver filled. One part system. Inorganic system for bonding applications up to 1200°F.

ETC Bond 598FS – Electrically and thermally conductive. Nickel filled. One part system. Low viscosity. For applications up to 1000°F.   SDS

ETC Bond 568 – Thermally conductive. Aluminum filled, 1:1 epoxy paste. Excellent mechanical strength to 400°F.   SDS Part A - Activator   SDS Part B - Base Resin

ETC Bond 805 – Thermally conductive. Aluminum filled. Two part epoxy paste. Low shrink rate. Excellent mechanical strength to 570°F.   SDS Part A - Activator  SDS Part B - Base Resin

ETC Bond 860 – Thermally conductive. Aluminum nitride filled. 1:1 epoxy paste. Excellent mechanical & thermal properties to 400°F.   SDS Part A - Activator   SDS Part B - Base Resin



Shipping

Orders with items in stock are packed within 24 hours. We ship with our best choice of courier, depending on goods ordered and shipping address provided.

Location

Standard delivery

Express delivery

Townsville/Local

Next day

N/A

Queensland

2-3 business days

N/A

NSW

4-10 business days

2-3 business days

SA/Tas/Vic/WA

6-14 business days

2-3 business days

Overseas

N/A

5-14 business days

*Note: Delivery times are as provided by our carriers and are estimates only. Delays may occur during peak periods, and due to factors outside the carriers' control.

Standard shipping is $15 in Australia (free on orders over $200). Add $5 to ship Express (under 2kg only)

Pickup

Order online and collect from our warehouse in Townsville.

Location

Freight Charge

Ready for collection

11 Carlton Street, Kirwan

$0

Once invoice has been emailed
(Less than 1 business day)



Shipping

Orders with items in stock are packed within 24 hours. We ship with our best choice of courier, depending on goods ordered and shipping address provided.

Location

Standard delivery

Express delivery

Townsville/Local

Next day

N/A

Queensland

2-3 business days

N/A

NSW

4-10 business days

2-3 business days

SA/Tas/Vic/WA

6-14 business days

2-3 business days

Overseas

N/A

5-14 business days

*Note: Delivery times are as provided by our carriers and are estimates only. Delays may occur during peak periods, and due to factors outside the carriers' control.

Standard shipping is $15 in Australia (free on orders over $200). Add $5 to ship Express (under 2kg only)

Pickup

Order online and collect from our warehouse in Townsville.

Location

Freight Charge

Ready for collection

11 Carlton Street, Kirwan

$0

Once invoice has been emailed
(Less than 1 business day)



Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page